Loading...
Back to Careers
W-2 Full-Time1099 Independent Contractor
Security & Surveillance.
Protecting what matters most.
Nationwide — All 50 StatesW-2 Full-Time / 1099 Independent Contractor
About This Role
The Security & Surveillance Crew deploys and commissions the physical security systems that protect Fortune 500 facilities — from IP camera networks providing complete coverage to access control systems governing every secured entry point. These technicians combine low-voltage cabling expertise with knowledge of security hardware, networking fundamentals, and system programming to deliver fully operational, client-accepted security solutions.
Key Responsibilities
01
Install IP cameras (fixed, PTZ, multi-sensor) including mounting hardware, conduit, and cabling to NVR/server head-end equipment
02
Deploy access control hardware including card readers, door controllers, electronic locks (maglocks, electric strikes), REX devices, and door position sensors
03
Pull and terminate low-voltage cabling (Cat6, composite cables, access control wiring) for all security devices
04
Perform basic programming and configuration of NVRs, VMS software, and access control panels
05
Conduct end-to-end system testing including camera focus/aim, door forced/held alarms, and recording verification
06
Install intrusion detection devices (motion sensors, glass break detectors, door/window contacts) and connect to alarm panels
07
Document all device locations, IP addresses, cable labeling, and as-built drawings
Qualifications
What We're Looking For
Required
Minimum 2 years of experience in commercial security system installation
Hands-on experience with major platforms: Genetec, Milestone, Avigilon, Verkada, Lenel, or HID
Proficiency in pulling and terminating low-voltage cabling for security devices
Working knowledge of IP networking fundamentals (IP addressing, PoE, VLANs, subnetting)
OSHA 10 certification
Valid driver's license; ability to pass background check and drug screening
Preferred
Manufacturer certifications: Genetec Certified Professional, Axis Certified Professional, or HID Credential Management
CompTIA Security+ or CompTIA Network+ certification
State-level low-voltage or security contractor license (where applicable)
Experience with integrated security platforms and command center environments
Key Certifications
OSHA 10Genetec / Axis / HID CertifiedCompTIA Security+CompTIA Network+State Low-Voltage License
Tools & Equipment
IP camera systems (Axis, Hanwha, Avigilon, Verkada), NVRs, PoE switches
Access control panels (Mercury, HID), card readers, electronic locks, power supplies
Laptop with VMS/access control configuration software
Multimeter, PoE tester, cable certifier, punch-down tools
Drill/impact drivers, fish tape, conduit bending tools, mounting hardware
PPE including harnesses for elevated work
Physical Requirements
1
Ability to work at heights on ladders, lifts, and rooftops for exterior camera installations; lift up to 50 lbs2
Comfortable working during off-hours, nights, or weekends to minimize disruption to client operations3
Able to work in varying environments including outdoor installations, parking structures, and server roomsEmployment Options
W-2 Full-Time
1099 Independent Contractor
Ready to Apply?
Join our Security & Surveillance team and deploy critical infrastructure for Fortune 500 companies across all 50 states.